I have a foxpro application which uses the Amyuni PDF driver to convert word documents and VFP reports to PDF. At one client's site, they appear to have had version 2.50e-3 installed at some point. This version does not seem to convert their word documents completely to PDF. I have tried removing the CDFInt250.dll from their \windows\system32 folder and then tried installing version 2.50a of the print driver. However, when I go to the printer settings, the version still says version 2.50e-3. I would like to use the older version, as the newer version seems to prevent some images being converted correctly, if I have the DPI set to 300 and choose to downsample images using imageoptions set to 2.
HJow to I completely remove the previously installed version of the CDFInt driver or could you suggest why the images get corrupted, fail to convert when creating a PDF from a word doc? Note, not all images fail, just some.
Print Driver Version keeps reverting to 2.50e-3
Re: Print Driver Version keeps reverting to 2.50e-3
Hello
Below are instructions on how to completely remove the driver:
==========================
To completely remove the PDF Converter, please follow the steps below:
1 - Run the command below from the directory where you have the driver currently installed
>install -u "Your Printer Name"
2 - Reboot your system **Very important step
3 - Search and remove all instances of the files below in the indicated directories
C:\WINDOWS\system32\spool\drivers\w32x86
acpdfui*.dll
acpdfu*.dll (possibly not installed)
acpdf*.dll
acfpdf.txt
cdintf*.dll (possibly not installed)
C:\WINDOWS\system32\spool\drivers\w32x86\2
acpdfui*.dll
acpdfu*.dll (possibly not installed)
acpdf*.dll
acfpdf.txt
cdintf*.dll (possibly not installed)
C:\WINDOWS\system32\spool\drivers\w32x86\3
acpdfui*.dll
acpdfu*.dll (possibly not installed)
acpdf*.dll
acfpdf.txt
cdintf*.dll (possibly not installed)
C:\WINDOWS\system32
Cdintf*.dll
Delete following folders and contents
C:\WINDOWS\system32\spool\drivers\w32x86\amyuni_amyunidocumentconverter300
C:\WINDOWS\system32\spool\drivers\w32x86\amyuni_amyunidocumentconverter251
NOTE: * denotes version number ex: cdintf251.dll
4 - Verify that the "Amyuni PDF Converter" driver is no longer in the printers folder
After you have finished the above steps, reinstall the new PDF Converter
Hope that helps
David
Below are instructions on how to completely remove the driver:
==========================
To completely remove the PDF Converter, please follow the steps below:
1 - Run the command below from the directory where you have the driver currently installed
>install -u "Your Printer Name"
2 - Reboot your system **Very important step
3 - Search and remove all instances of the files below in the indicated directories
C:\WINDOWS\system32\spool\drivers\w32x86
acpdfui*.dll
acpdfu*.dll (possibly not installed)
acpdf*.dll
acfpdf.txt
cdintf*.dll (possibly not installed)
C:\WINDOWS\system32\spool\drivers\w32x86\2
acpdfui*.dll
acpdfu*.dll (possibly not installed)
acpdf*.dll
acfpdf.txt
cdintf*.dll (possibly not installed)
C:\WINDOWS\system32\spool\drivers\w32x86\3
acpdfui*.dll
acpdfu*.dll (possibly not installed)
acpdf*.dll
acfpdf.txt
cdintf*.dll (possibly not installed)
C:\WINDOWS\system32
Cdintf*.dll
Delete following folders and contents
C:\WINDOWS\system32\spool\drivers\w32x86\amyuni_amyunidocumentconverter300
C:\WINDOWS\system32\spool\drivers\w32x86\amyuni_amyunidocumentconverter251
NOTE: * denotes version number ex: cdintf251.dll
4 - Verify that the "Amyuni PDF Converter" driver is no longer in the printers folder
After you have finished the above steps, reinstall the new PDF Converter
Hope that helps
David
Amyuni Custom Development
Do you need a specific PDF solution? Are you looking for expertise that will enable you to start or complete a PDF integration project?
http://www.amyuni.com/en/company/services.php
Do you need a specific PDF solution? Are you looking for expertise that will enable you to start or complete a PDF integration project?
http://www.amyuni.com/en/company/services.php
Re: Print Driver Version keeps reverting to 2.50e-3
Many thanks
I will give that a go
I will give that a go