Implementing PDF Converter 3.0 in PB 5.0 App

If you are a Power Builder developer and have any questions about using our products from Power Builder here is the place to post them.
Post Reply
kmcphail
Posts: 3
Joined: Fri Jan 11 2008

Implementing PDF Converter 3.0 in PB 5.0 App

Post by kmcphail »

We have a customer who has an old PowerBuilder 5.0 application (they do not want to spend the $$ to upgrade to a current version) that uses PDF Converter v2.06 and worked fine until Vista came along. They want to use this app with Vista so we need to upgrade the PDF Converter to v3.0.

Has anyone done this successfully? No laughing!
Joan
Amyuni Team
Posts: 2799
Joined: Wed Sep 11 2002
Contact:

Post by Joan »

Hello,

I didn't really get your question. But you need to use version 3.0 of the PDF Converter with Vista or at least you need to use a version old than 2.50-d

Version 3.02 that is currently online is signed for Vista.

There is one known issue about the installation under Vista, you will need to install the PDF Printer to a new port instead of to the LPT1: port.
This issue is being look at by our team.

Hope this helps.
Custom Brand the Amyuni PDF Printer Driver http://www.amyuni.com/en/developer/branding/index.html

Amyuni PDF Converter tested for true PDF performance. View results - http://www.amyuni.com/benchmark
kmcphail
Posts: 3
Joined: Fri Jan 11 2008

Post by kmcphail »

My question is has anyone successfully implemented PDF Converter v3.0 in a PowerBuilder 5.0 application?
Joan
Amyuni Team
Posts: 2799
Joined: Wed Sep 11 2002
Contact:

Post by Joan »

Well I can't be of much help with this myself. When i started using Powerbuilder it was version 7. I never tried version 5 at all.

I hope some powerbuilder developers visiting this forum will be able to help you.
Custom Brand the Amyuni PDF Printer Driver http://www.amyuni.com/en/developer/branding/index.html

Amyuni PDF Converter tested for true PDF performance. View results - http://www.amyuni.com/benchmark
Post Reply